Steven W.
The caster wheels were essential to my setup, allowing me to move my rig around with great ease, I don't think I'd be able to cope without them given how sturdy and heavy the Prime lite cockpit is.
Vytautas V.
Caja vino sin instruciones de montaje. Tornillos demasiado largos parte inferior de cuatro lados se abrieron. No se si lo aveis probado pero da pena. No piedo devolver ha que tendre que cubrir gastos de envio. Empresa de raparto UPS nunca entrego a la hora garantizada. Conclusion final a nadie voy recomendar vuestro producto me siento engañado!
Damien Q.
Le reglage de hauteur se coince sur certaines roulettes ce qui les rendent inutilisables !
vu le prix je suis mécontent
carl g.
Haven't used these yet... but the design is great and we'll thought through
Ethan D.
These are awesome. Even with a fully-laden Prime rig with a chunky Moza R16 on it, movement is swift and easy. These casters work so well and were worth every penny, and the extendable rubber feet are a great touch for stability in place (even if they do get a little tough to extend under load, but that's a given really)
Great stuff.
Denis F.
I would NOT recommend!! They're a great idea but the plastic piece that turns to adjust the height of the rubber is the weak link that ruins them. I have two of the six that no longer turn and I've adjusted the wheels twice. Save your knuckles and go another route.
Cheok Yean C.
The wheels were great for a few weeks, used it on my Track Racer TR160 (similar to Prime). However the adjustable feet were causing issues on two of the wheels. It’s NOT retracting. I think two of the wheels are busted and there’s now too much friction when I need to move the rig around my carpet.
There’s very little clearance between the pads and the carpet, so it can get very challenging if you have a plush carpet.
Jimmy M.
J'adore ces roues extrêmement robustes et de très grande qualité le seul point négatif est le changement entre roues et pieds un peu trop long à faire inutilement ... j'aurais mis une pédale rapide pour les pieds pour faire le changement plus rapide comme dans mon cas je dois le bouger régulièrement donc ce n'est pas pratique pour moi mais je le laisse en tout temps sur les roues et ça ne bouge pas du tout
Justin B.
Good Wheels but no explanation how to mount. U have to put a nut beetween the wheel and your cockpit. I didn’t do that at the beginning and i twist a headless screw with my weight when i seat for the first Time. And the red wheel is damaged because i tight to much on the cockpit without the nut between wheel and cockpit.
Craig T.
Easy to fit and made of solid construction, probably a bit overpriced, but you get quality
Andrew G.
Love the prime frame with the casters. Makes moving the beast much more manageable!
Matt R.
Maybe this is down to my use case, but I have problems on a couple of the wheels where the stud is bending. I move my rig into and out of position every time I use it, so I don't wind the feet down, I just leave it on the wheels whilst in use, and I think my weight on the rig is then causing the studs to bend.
mark t.
Great casters. Very heavy duty. Much better than the cheap Amazon caster's I had on my titan.
Mathias J.
Nice and easy tot install. Still not sure how to use the stops but that has more likely to do with me than with the product
Brian F.
They are junky. I ordered 12. 2 of the 6 i've tried so far are broken. They appear to be a cheep knock-off of foot master casters.
Loïc H.
Just perfect, what i was looking for
Maik D.
Nice quality caster wheels. A manual on how to install them would be handy though for people with 2 left hands.
Gary L.
well i found gt omega when i got into sim racing from a youtuber Karl gosling i got your gt prime rig then i know i need the casters for it they work great thanks
Alan B.
The castors are heavy duty and a great additon to the prime cockpit. Makes moving the entire rig really easy.
The way you can extend the feet to stop the rig from moving works excellently.
John S.
Casters work great, I like the adjustability to level the rig when locked. Only downside is is a bit cumbersome to spin the lever to lower and raise feet.
Would be amazing it the foot height adjustment was seperate in some way, then an easy pedal or something to lower and lock them.
Jeff S.
Very robust and should really last. I wish there were a quicker way to get the feet down than the dial, I need to move it daily and end up not dialing the feet down.
Zackery B.
They work great easy to use. They roll very well. If they’re in stock grab them.
Norman R.
Great compact casters for a sim rig. They don't stick out like conventional casters and they make a very sable platform when the rubber feet are extended.
Dabid S.
The casters seem well made. However, the way they attach is not idea. The grub screw and the locking nuts extends the caster way from the frame. This meant that the grub screws bent for me. I use the casters to more the rig out when I want to use it so I do not screw the foot part of the caster out each time which probably does help as it add leverage. Anyway, I ended up just cutting the screws down so the big flat nut of the caster rested on the rig when tightened. They have been fine since. Overall really nice casters and a reasonable price.
Antonis K.
Good product and quality for low Price, fast and free delivery, what you want more!!!
Marios B.
Packaging was ok. The bottom 4 casters were like they were a bit used or something (had little smudges on them on the rubber foot and the screws were like they had rust on them). I'm guessing they do what they are supposed to do but the screw is a bit short and when reaching almost its end, the rubber foot is not very stable. Also on the photos the mechanism lowering the feet seem like anodized metal but its just plastic.
Luke P.
I was truly shocked when I opened the long awaited castor wheels. On the website they are seen as nice & smooth and upon opening they are not like that far from it ! They have other company branding on them and are not that nice as described in your photos on the website. Also the red nut on the website looks to be that it is anodized red and metal whilst the real thing is just plain red plastic which looks very cheap. I was thinking I was getting something more refined than what I found in the box which I am not that happy about.
Chris B.
Excellent design and quality
Edwin Z.
After initially receiving the wrong item, it was solved after getting in touch with Lawrence. Received my caster wheels a last Thursday in good order. Although the box warns me to carefully read instructions, those were not included in the box. Haven’t had the time to install them on my prime rig. I’ll probably look for instructions online before I’m doing that. I guess I need those spring bolts that came with my rig? Good addition these casters are though, was already looking for third party caster wheels, since the whole setup is way too heavy to move. I’m glad you are now offering them, colours are awesome.
Garry B.
The only issue is that the threaded stud should be permanently attached to the caster and is quite short and kept undoing itself, but other than that a great addition to my prime.
Andrea F.
A must for who, like me, has to move the rig in and out to get in. Super solid wheels
Benjamin K.
I love you guys. All of it.
In German we say: Macht weiter so!
Ronny O.
Not much to say, they work like a charm. If you need casters for your rig, look no further.
Leonard L.
Holds the rig in place when in use, provides easier mobility when not.
Richard K.
These casters have been added to my rig. Much sturdier that I expected with height adjustment. Works brilliantly.